•ResetPosition
Youcan restore the position saved at motor antenna to the default setting.
1. Select Reset Position using the buttonand press the OK button.
2. Pop-up will appear. Select OK and press the OK button to restore all values saved at motor antenna to
defaultsetting.
3. Please wait during the motor antenna is restored.
Note: Resetmay not be activated depending on the condition of the antenna. Repeat the procedure above if
necessary.
3. Transponder
1. Select Transponder in Search Channel using the button
andpress the OK button.
2. Select an option for Transponder using the OK or
button.
3. To add another transponder, select User Define from the list.
4. AddTransponder screen will appear. Enter the values for
Frequency,Polarization, Symbol Rate, Transmission, FEC,
Modulationand Pilot.
5. Select Save and press the OK button to complete.
**
Frequency
1. Select Frequency using the button.
2. Enter the frequency using the NUMERIC(0-9) buttons.
**
Polarization
1. Select Polarization using the button.
2. Select one option among Auto,Horizontal and Vertical using
theOK or button.
**
**
10. Installation
GB 63