10.2 SMATV Search
SMATVSearch allows you to perform channel search regardless of the setting value in antenna setting.
1. Select SMATV Search using the button,and press the OK
button.
2. Select Search Type using the button.
3. Select one option from Auto and Manual using the OK or
button.
1. SMATV Automatic Search
Start/EndFrequency
1. Select Start/End Frequency using the button.
2. Enter the frequency using the NUMERIC(0-9) buttons.
Note: Enterthe frequency from 950 to 2150 MHz.
**
SymbolRate
1. Select Symbol Rate using the button.
2. Select one option among 27500, 26000 and 22000 using the OK
or button.If the required value does not exist, select
UserDefine and enter the symbol rate directly.
Note: Youcan enter up to four symbol rates.
**
SelectSearch and press the OK button.
GB 67