AT&T 2400 manual Table A-1. SID Error Codes and Descriptions

Error Logs

Table A-1. SID Error Codes and Descriptions

Code	Description	Type	Action
1	VM Comm Error	W	Check SMDI connection and parameters
2	No Free VM_IN Packets	W	Check SMDI connection and parameters
3	Excess Data -- VM_IN Pkts	W	Check SMDI connection and parameters
5	Bad MWI Pkt	W	Check SMDI connection and parameters
6	No Free Centrex Pkts	W	Check SMDI connection and parameters
10	Excess Data - PBX_IN pkt	W	Check MCI connection and parameters
11	Kernel Error	E
12	No Free PBX_OUT Packets	W	Check MCI connection and parameters
13	Idle Task Not Enough Time	W
15	Bad PBX Pkts > 50%	I	Check MCI connection and parameters
16	Bad PBX Pkts > 5%	I	Check MCI connection and parameters
17	System Startup	I	No action required
19	System Powerdown	I	No action required
20	VM Comm Error > 5%	E	Check SMDI connection and parameters
21	VM Comm Error > 50%	E	Check SMDI connection and parameters
22	Boot Error: RTC	E	Set time and date
23	Boot Error: SCC	E
24	Boot Error: LED	E
25	Boot Error: Modem	E
26	Boot Error: DPRAM	E
27	Bad MWI Pkts > 50%	I	Check SMDI connection and parameters
28	Bad MWI Pkts > 5%	I	Check SMDI connection and parameters
29	PBX Comm Error > 5%	E	Check MCI connection and parameters
30	PBX Comm Error > 50%	E	Check MCI connection and parameters
31	Bad PBX Packet	W	Check MCI connection and parameters
32	Hardware Watchdog Reboot	E
33	Integration Stop	I	No action required
34	Integration Start	I	No action required
35	No Free PBX_IN Packets	W	Check MCI connection and parameters
36	Hardware Reset	I	No action required
37	VM Remote Reset	I	No action required
38	Software Reset	I	No action required

Issue 2 December 1995 A-7