Switch Integration Device Administration
Administer the Basic Parameters
In Chapter 3, "Switch Integration Planning", you completed switch integration planning worksheets and determined the values for each of the basic parameters. If you did not complete the worksheets, turn to Chapter 3 and complete them now before you proceed with the instructions in this chapter.
After you complete the worksheets in Chapter 3, continue with the instructions on the next page to configure the basic parameters.
1.To access the basic parameters edit forms, press FUNC on the SID keypad.
After you press the key, you see the MCI MAIN MENU as shown in the following example:
NEC |
2.To set up the basic parameters for the MCI data link, press 4 on the SID keypad to select the SETUP option.
After you press the key, you see the SETUP menu as shown in the following example:
SETUP |
3.Press 1 on the SID keypad to access the first in a series of eight PARAMS edit forms as shown in the following example:
SETUP | Number of Ports | 140 |
|
|
|
4.Enter the number of analog voice mail ports from worksheet A that the SID must support for the INTUITY System.
5.Press 
to confirm the number and move to the next basic parameter edit form, the MSG DESK NUMBER form, as shown in the following example:
SETUP | Msg Desk Number: | 001 |
|
|
|
