From time to time, you may need to purge your error logs. You can purge error logs on the SID if you have authorization to access security level 1 features. Use the following instructions to purge error logs.

1.Press FUNC to access the Main Menu.

2.Press 5 to select Logs. After you press the key, you see the Logs menu as shown in the following example:

LOGS

1-View

2-Purge

 

 

 

3.Press 2 to select Purge. After you press the key, you see the screen shown in the following example:

PURGE LOGS?

1-Yes

2-No

 

 

 

4.Press 2 to cancel the purge. The SID save the error logs. Press 1 to erase the error logs.

The SID starts to record new error messages after you purge the old logs. After the SID completes the purge, you see the following message on the screen:

Purging Logs...

A-8Issue 2 December 1995

Page 120
Image 120
AT&T 2400 manual Purge LOGS?