Hardware Installation
Connect an Analog Line to the Modem
This task should be performed by the AT&T installation technician and the customer or the customer’s switch technician.
The SID contains an internal modem that allows for remote site access and maintenance. You must connect an analog line from the switch to the remote modem to allow for maintenance. Connect the analog line to the switch before the AT&T installation technician arrives.
Use the following procedure to connect the analog line to the modem.
1.Connect the analog line to the MODEM port on the SID, as shown in Figure
Proceed to the next task.
| 25 Pin |
| 25 Pin |
|
|
|
Power |
| Link B |
|
| Link A |
|
Switch |
|
|
|
| ||
|
|
|
|
|
| |
Power |
|
|
|
|
|
|
Cord |
|
|
|
|
|
|
Outlet | Diag | Net B | Net A | Modem | Line B | Line A |
(Male) |
|
|
|
|
|
|
|
|
|
|
|
| |
| 50/60 Hz |
|
|
|
|
|
(Fan Outlet)
