AT&T 2400 manual Assign the MCI Link to a UCD Group, Index Assignment Values Port Data

NEAX 2400 Switch Administration

Under the Port heading, find the port number you assigned to the MCI link in the "Assign a Port for the Message Center Interface Link" section. When you find the port number, locate the index value in the Index column across from the port number. Figure 7-9.uses an index value of 117, showing that the MCI link was assigned port number 1.

Table 7-2. Index Assignment Values

Port	Index	Data
MAT Terminal
1	117	01
2	118	01
3	119	01
4	120	01
5	121	01

4.Enter 1 in the DATA field. The number tells the switch that the port is a terminal and allows two-way communication.

Assign the MCI Link to a UCD Group

You must instruct the switch that the MCI link is associated with the UCD group you created in the previous section. If you do not perform this step, the switch does not communicate through the MCI link.

7-16Issue 2 December 1995