System Configuration

NEC NEAX 2400 MCI Hardware

The customer must provide the correct switch and related components as described in Table 1-3.All required items should be available and configured before an AT&T technician arrives to install the INTUITY system. The INTUITY system integrates only with the NEC NEAX 2400 switch and related components described in Table 1-3.

Table 1-3. NEAX Switch Required Components

 

 

AT&T

Customer

 

Component

Description

Supplied

Supplied

 

 

 

 

 

 

NEAX 2400 MCI

Models UMG and MMG with software

 

X

 

Switch

level 4000 or greater with support for

 

 

 

 

the MCI link

 

 

 

 

Models SIM and IMG with software

 

 

 

 

level 5200 or greater with support for

 

 

 

 

the MCI link

 

 

 

 

The switch must have the 5200

 

 

 

 

Feature Application Floppy Disk

 

 

 

 

software installed. After installing the

 

 

 

 

software, reboot the switch.

 

 

 

 

 

 

 

 

MCI Digital Port

Configure an I/O port, for example

 

X

 

 

PA-IO02, as the MCI link

 

 

 

 

 

 

 

 

PA-16LCQ analog

PA-16LCQ recommended because it can

 

X

 

ports

be programmed to provide loop current

 

 

 

 

disconnect. An analog port is required

 

 

 

 

for each voice port. An analog port is

 

 

 

 

also needed for the internal modem on

 

 

 

 

the SID.

 

 

 

 

 

 

 

 

Issue 2 December 1995 1-9

Page 25
Image 25
AT&T manual NEC Neax 2400 MCI Hardware