
Configuring the Message Center Interface Link
Use the following instructions to configure the UCD group with the MCI link.
1.At the INSTALLATION COMMANDS menu, shown in Figure
Assignment of System Data |
|
|
| |||
SYS: 2 |
| TN: | 1 | SYS | : System Data Items | |
INDEX: | 6 | DATA: |
| 01 | Data 1 | |
|
|
|
|
| Data 2 | |
|
|
|
|
| Data 3 | |
|
|
|
| TN | : Tenant Number | |
|
|
|
| INDEX: System Data Index | ||
|
|
|
|
| System | Index |
|
|
|
|
| 1 | |
|
|
|
|
| 2 | |
|
|
|
|
| 3 |
DATA : System Data
Figure 7-10. Assignment of System Data
2.Enter 2 in the SYS field to tell the switch to associate the MCI link with a UCD group on a tenant by tenant basis.
3.Enter 1 in the TN field. You must use the same tenant value that you used to create the analog stations and UCD groups.
4.Enter 6 in the INDEX field. The value contains fields that allow the system to associate the MCI link with the UCD group or groups.
Issue 2 December 1995