AT&T 2400 Switch Integration Device Required Hardware, Customer Component Description Supplied

Introduction and Requirements for Integration

Switch Integration Device Required Hardware

Table 1-1lists the required SID components for the integration.

Table 1-2. Switch Integration Device Hardware Components Required for the Integration

		AT&T	Customer
Component	Description	Supplied	Supplied
SID	AT&T Switch Integration Device,	X
	Release 2
Null Cable	Used for connection to SID	X
Y-Cable	Used for connection from Null cable to	X
	customer A25B Cable
A25B Cable	25-pair Amphenol female-to-female cable		X
	used to connect Y-Cable and NEAX port
	cable or MCI cable
MCI Cable	Cable that connects from the NEAX MCI		X
	digital port to the A25B cable

NOTE:

AT&T only assumes responsibility for connecting the Null cable and the Y-cable to the SID. All remaining connections must be performed by the customer or the customer’s switch technician.

1-8Issue 2 December 1995