
The Switch Integration Device Software
In the example, you use the MCI form to set the baud rate for the MCI link. You can set the baud rate to specific values between 300 and 9600 baud. On the form you see a default value of 1200. To see the other options, you press the left arrow key to decrease the baud rate or press the right arrow key to increase the rate. When you find the rate you want, press ENTER to confirm your choice. You can recognize scroll item edit forms by the small arrow symbols (<-
Edit Form Keys
Edit forms require you to enter data for SID setup and configuration. Most edit forms have default values already entered on them. If you choose to use the default value, press FUNC to exit the form. As you edit forms, you can move to the next or previous edit form, return to the main menu, or access a help screen. Refer to the table below for a list of keys and the action each key performs.
Key | Action | |
|
|
|
1,2,3,4,5,6,7,8,9,0 | Data entry keys | |
*,# | Data entry keys | |
Func | Return to main menu | |
Mode | Help | |
Up Arrow | Go to previous edit form | |
Down Arrow | Go to next edit form | |
Right Arrow | Get higher value | |
Left Arrow | Get lower value | |
Enter | Confirm entry | |
|
|
|
With some menu selections, you can access multiple edit forms that link together. When you access multiple edit forms, press to move to the next form or press
to move to the previous form.
Issue 2 December 1995