Administer the Basic Parameters
6.Enter the
7.Press 
to confirm the number and move to the next basic parameter edit form, the CPID PAD STRING form, as shown in the following example:
SETUP | CPID Pad String: | 0000000 |
8.Press 
to accept the default CPID Pad String number of 0000000 and move to the next basic parameter edit form, the MWI PAD STRING form, as shown in the following example:
SETUP | MWI Pad String: | 0000000 |
9.Press 
to accept the default MWI pad string number of 0000000 and move to the next basic parameter edit form, the MWI FEATURE form, as shown in the following example:
SETUP | MWI Feature: | ENABLE |
<-
10.Set the value for the message waiting feature as listed on worksheet A in Chapter 2.
The SID defaults to Enable. If you want to turn off the feature, press the left or right arrow key to change the value to Disable.
11.Press ENTER to confirm the information.
You have finished entering the MCI basic parameter information. To return to the MCI MAIN MENU, press FUNC .
Proceed to the “Assign Extensions and LTNs” section on the next page to continue the SID configuration.
Issue 2 December 1995
