AT&T 2400 manual Intuity System Required Hardware, At&T

System Configuration

Intuity System Required Hardware

Table 1-1lists the hardware components required on the Intuity system for the NEAX integration.

Table 1-1. Intuity System Hardware Components Required for the Integration

		AT&T	Customer
Component	Description	Supplied	Supplied
MAP/5, MAP/40, or	Hardware platform that operates the	X
MAP/100	Intuity system software
IVC6 cards	Integrated Voice Processing (IVC6)	X
	cards used for voice port connections.
	May have a maximum of 11 cards.
	Includes any of the following hardware:
	885A adaptors and cables	X
	25-ft. modular cords with 6-pin to 25-pin	X
	adapters
	Two high density cables, RJ21X, with a	X
	356B adapter for T/R distribution
Multiport serial	Equinox multiport card provides multiple	X
port card	serial ports for adjunct component
	connections. On the MAP/40 and MAP/
	100, the COM ports are occupied by
	other components and the Equinox card
	must be used for the SID connection. On
	the MAP/5, the COM1 port can be used
	for the SID connection.

MAP5 only: RS-232 cable (DB-25)

For a COM1 connection on the MAP/5, an	X
RS-232 cable, DB-25, is required to
connect the SID to the Intuity system.
The cable includes a 25-pin to 9-pin
adapter (DB-9).

Equinox connection only: RS-232 cable with 6-pin to 25-pin adapter

For a connection to the Equinox multiport	X
serial card, an RS-232 cable with a 6-pin
to 25-pin adapter is required.

Issue 2 December 1995 1-7