Acceptance Tests
Task 3: Forward Subscribers for All Calls
Use this feature to forward all calls to the INTUITY System. The switch automatically transfers the call to the UCD group administered for the INTUITY System.
NOTE:
The subscriber’s service feature class must contain call forward RNA SFI=7. Dterm sets may have a function key for forward on busy (FKY=2).
Use the following instructions to forward all calls for acceptance tests.
1.Using the phone of the first test subscriber, lift the handset and listen for the dial tone.
2.Dial the access code or press the function key for forward all calls. After you perform the action you hear a second dial tone.
NOTE:
If you do not know the access code or the function key for forward all calls, contact your switch administrator. The switch administrator sets the codes and function keys during the initial setup of the switch.
3.Dial the main extension of the UCD group to forward all calls to integrated voice mail. You created the UCD main extension during the switch administration process in Chapter 7 of this document.
Repeat Task 1, 2, and 3 for the second test subscriber. After you administer all features for both test subscribers, return to the “Acceptance Test” chapter in INTUITY Software Installation,
