NEAX 2400 Switch Administration
Configuring the Message Center
Interface Link
Voice messaging information travels from the switch to the SID through the Message Center Interface (MCI) link. For the MCI link to function properly, you must configure the MCI data link. During the process you perform the following actions:
■Administer the Message Waiting Lamp
■Assign a port for the MCI link
■Define the MCI port as a terminal
Administer the Message Waiting Lamp
You must administer the switch to assign Message Waiting Lamp (MWL) control to the MCI link. Use the following instructions to administer the MCI link MWL parameters.
NOTE:
Do not change any information on any screen until you contact your NEAX 2400 switch administrator. Few switches are identically configured. The instructions in this section provide the minimum requirements for the MCI integration to function with the SID. If you need more information on configuring the switch, contact your switch administrator or consult the documentation supplied with the switch.
