Voice Mail Administration
3.If your switch has password capability, assign a password to the new extension.
4.Assign to the new extension, the service: ldg_ni_vm
a.Log on to the INTUITY system as sa or craft.
b.From the INTUITY Administration menu select the following sequence:
>Voice System Administration
Voice Equipment
c. From the Voice Equipment screen, press
ASSIGN (F3).
d.Select Services to Called Numbers from the Assign menu.
e.Press CHOICES (F2) and select ldg_ni_vm.
f.Enter the called number that was administered on the switch for this purpose.
g.Press SAVE (F3). A
h.Press CANCEL (F6) three times to exit to the Voice Equipment screen.
5.If the phantom extension is to be accessed from outside your system, assign the extension to a
6.Provide the Lodging message retrieval number to your subscribers for the Lodging application.
Voice Mail Administration
Voice mail is enabled when the switch sends a guest’s call to a coverage path. The following procedure, however, provides a separate number that can be used at any time to send voice mail to a guest.
To provide this service:
1.Administer on your switch a phantom number. This number is used to send voice messages to your subscribers.
2.Configure the phantom number so that the INTUITY system hunt group covers all calls.
Issue 2 December 1995
