Using Metrics Mode
Using Metrics Mode
Use the following instructions to use the Metrics monitor mode.
1.Access the View menu as described in the previous section.
2.Press MODE .
3. Press 4 | to select the Statistics | option. You see the following screen: | |
|
|
|
|
| METRICS | Calls/Hr: | 12001 |
|
| MWIs/Hr: | 9071 |
|
|
|
|
This display updates occasionally, showing performance measurements for both the SID’s call processing and message waiting activities. The top line shows a running average for the number of calls serviced by the INTUITY System per hour. The bottom line shows a similar statistic for the number of message waiting commands serviced by the SID per hour. Use the Metric mode to monitor the performance characteristics of your integrated system.
Clearing Statistical Information
The SID accumulates data that supports the Statistics and Metrics views. You may wish to purge the data to begin taking new measurements, especially when you add subscribers to the system, analog voice mail ports, or change your usage habits. To clear the data, use the following instructions.
1.Log into security level 1. For instructions on logging in to the security level, refer to Chapter , "NEAX 2400 Switch Administration", in this document.
2.Press MODE at the VIEW action form.
3.Press 5 to select Clear and remove the old statistics. After you press the key, you see the following message on the screen:
Clearing Statistics...
The SID clears all statistical information. After a few seconds, the display clears and the SID returns to the View menu.
Issue 2 December 1995
