AT&T 2400 manual Edit Forms, Setup Form

The Switch Integration Device Software

Example: If you wanted option 4, SETUP, from the MCI User Interface Main Menu shown in Figure 2-2.,press 4 on the keypad. After you press 4, you see the SETUP form appear on the screen as shown in Figure 2-3..

SETUP 1-Params 2-Ports 3-Clear

4-Advanced

Figure 2-3. The Setup Form

The SID uses menus to organize all options and functions into categories. Menus also permit the user to navigate easily through the forms by pressing one or more keys.

Each type of form requires you to use different keys on the keypad to make selections and enter information. The table below shows you what keys to use with the menu forms.

Key	Action
1,2,3,4,5,6,7,8,9,0	Select menu option
*,#	No action
Func	Return to main menu
Mode	No action
Arrows	No action
Enter	No action

Edit Forms

Edit forms allow you to use the keypad to enter information into the SID’s configuration. There are three types of edit forms:

■Single Item

■Two Item

■Scroll Item

This section contains descriptions and examples of each type of edit form and provides you with instructions for using the forms.

Issue 2 December 1995 2-5