Clearing Your Configuration

Clearing Your Configuration

When you add voice mail ports or change the switch dial plan, you may need to reconfigure the SID. In most cases, you can accomplish the task by editing the existing setup and restarting the system. If required, the SID provides the capability to restore the factory default settings.

To clear your configuration and restore the factory setting, use the following instructions.

1.Press FUNC to access the Main Menu.

2.Press 4 to select the Setup option. After you press the key, you see the SETUP menu as shown in the following example:

SETUP

1-Params

2-Ports

3-Clear

4-Advanced

3.Press 3 to select Clear. After you press the key, you see the Clear Setup screen as shown in the following example:

CLEAR SETUP?

1-Yes

2-No

 

 

 

4.Press 2 to cancel the clear and return to the SETUP menu.

Press 1 to restore the factory default settings. When you clear your configuration, you remove all global parameter information, dial plan, logical terminal number information, and SMDI and MCI serial port information. The contrast and Enhanced MWI handling settings are restored to the factory defaults. The only information preserved are your error logs and statistical tables. Using the clear command stops the integration. You must configure and start the system to integrate calls.

Issue 2 December 1995 A-9

Page 121
Image 121
AT&T 2400 manual Clearing Your Configuration