Administering the INTUITY System for the NEAX Integration

Administering the Switch Link

Administration Screen

During the NEAX software installation process, the values for the Switch Link Administration screen were administered. You need to change the default settings on this screen. Use the following procedure to change the settings.

1.Login as craft.

2.Press ENTER to accept the AT386 default.

You see the INTUITY Administration menu as shown in Figure 6-1.

Figure 6-1. INTUITY Main Menu

3.Select Switch Interface Administration from the INTUITY Main Menu. After you select the option, you see the Switch Interface Administration menu as shown in Figure 6-2.

6-2Issue 2 December 1995

Page 62
Image 62
AT&T 2400 manual Administering the Switch Link Administration Screen, Intuity Main Menu