TROY Group 100S manual Troy Print Server Command Console, Accessing WebXAdmin Utility

Section 2 Print Server Management Utilities

TROY

WebXAdmin

Utility

Accessing the

WebXAdmin

Utility

TROY Print

Server

Command

Console

WebXAdmin allows you to configure the print server with a standard web browser like Netscape Navigator or Microsoft Internet Explorer. It can therefore be used on any operating system that supports web browser capabilities. To use WebXAdmin, you must first make sure that you have a web browser installed on your computer and that you have configured an IP address in both the computer and the print server. Also make sure that you have configured your TCP/IP stack to communicate over the local area network (rather than via a PPP dial-up connection).

To use the WebXAdmin utility, start your web browser and enter the IP address of the print server as the destination web site. Once you are connected, enter the password (ACCESS is the default password) and select the protocol or other item that you wish to configure. You will then be connected to the appropriate web page for configuration of that item. You may use the normal browser buttons to move forward and back through the web pages.

All TROY print servers support a sophisticated command-line-oriented console for configuration and management. This console contains features that are not available through WebXAdmin, including sophisticated diagnostic capabilities. The TROY print server command console can be accessed via TELNET and the TROY XCONFIG NetWare Utility. It is also available through one of the web pages using the WebXAdmin Utility. The general configuration procedure is the same regardless of which method is used.

PocketPro 100S Administrator’s Guide -- Document #40165-110 Rev. A 2-2