Section 4 | Novell NetWare Network Configuration |
Adding Netware
Print Queues in
Queue Server
Mode Using
NWAdmin (cont.)
8.Create a print server object by clicking on the container where the object will reside. Select Object from the menu bar, and then click on Create. When you get the New Object menu, select Print Server (Non NDPS), and then click on OK.
9.Enter the name of the TROY print server (the default is TWC_xxxxxx_P1) and select Create. Use the default print server name (the default names are listed under Default Print Server Names at the beginning of this chapter) unless you specifically changed it with ExtendView, XAdmin32 or print server console. The new print server should now be listed as shown.
PocketPro 100S Administrator’s Guide |
