TROY Group 100S manual Using Telnet Commands Using Xconfig Commands, Telnet ipaddress

Section 2 Print Server Management Utilities

Using TELNET Commands

Using XCONFIG Commands

To connect to the print server using TELNET on UNIX, Windows NT, or most other TCP/IP systems, type the following command at the UNIX system prompt:

TELNET ipaddress

The ipaddress is the IP address of the print server. When you are connected, push RETURN or ENTER to get the "#" prompt, enter the password ACCESS (it will not echo), and type anything in response to the Enter Username> prompt. When you get the Local> prompt, you are ready to enter commands.

To connect to the print server using the TROY XCONFIG NetWare Utility, insert the TROY Print Server Software CD in your CD-ROM drive, browse the CD contents and look for XCONFIG.

If you have only one print server, you will be immediately connected. If you have more than one print server, you will be given a list of available print servers. Type the number of the print server you want to connect to. When you are connected, enter the password ACCESS (it will not echo) at the "#" prompt, and type anything in response to the Enter Username> prompt. When you get the Local> prompt, you are ready to enter commands.

PocketPro 100S Administrator’s Guide -- Document #40165-110 Rev. A 2-3