Appendix C | Reloading the Firmware |
Introduction
Downloading
New
Firmware
Using the
TCP/IP
Update Utility
in Windows
The firmware code used in the TROY PocketPro 100S print server is stored in flash memory. The firmware files stored in the flash memory of the PocketPro 100S can be upgraded by downloading the appropriate update file.
NOTE: The firmware can also be upgraded using the XAdmin32 Utility by downloading the software and procedures from the TROY web site at http://www.troygroup.com.
1.Run the TROY Wireless Update utility for TCP/IP. The About Update for TCP/IP window will be displayed. Click on OK to continue. The Select Update File window will be displayed.
2.Select UpdateFiles (*.bin) file type, locate the PocketPro 100S bin file, and then click on Open. A window will be displayed (see next page) showing the file(s) you have selected including the revision level and date code for each file.
PocketPro 100S Administrator’s Guide |
