TROY Group manual PocketPro 100S Print Server TCP/IP Network Configuration

Table of Contents

TROY

PocketPro

100S Print

Server

Section 3 – TCP/IP Network Configuration

Introduction	3-1
TROY TCP/IP Concepts	3-1
TCP/IP UNIX Host Configuration	3-1
HP/UX Configuration	3-4
IBM RS/6000 AIX Configuration	3-5
Sun Solaris 2.x Configuration	3-6
SCO UNIX Configuration	3-7
Other Non-Standard Configuration Options	3-8
Using ExtendView to Assign an IP Address	3-11
Using DHCP to Configure the Print Server IP Address	3-11
Using arp and ping to Configure the Print Server IP Address	3-12
Using rarp to Configure the Print Server IP Address	3-13
Using BOOTP to Configure the Print Server IP Address	3-14
Configuring the Print Server IP Address with NCP or XCONFIG	3-15
IP Security	3-17
Raw TCP Ports	3-17
Changing the Configuration (optional)	3-18

Section 4 – Novell NetWare Network Configuration

Introduction	4-1
NetWare Concepts	4-1
General Information	4-2
Before You Begin	4-2
Default Names (Service Names)	4-3
Configuring the Print Server in Queue Server Mode	4-3
Configuring the Print Server in Bindery Queue Server Mode Using ExtendView	4-4

PocketPro 100S Administrator’s Guide -- Document #40165-110 Rev. A TOC-3