![](/images/new-backgrounds/1148853/14885355x1.webp)
Section 3 | TCP/IP Network Configuration |
Other Non-
Standard
Configuration
Options (cont.)
3. Use the following
CRTOUTQ OUTQ(<queuename> RMSTSYS (*INTNETADR) RMTPRTO(<service>)
AUTOSTRWTR(1) CNNTYPE(*IP) DESTTYPE (*OTHER) MFRTYPMDL (<driver>)
INTNETADR(‘<ipaddress>’) TEXT (‘<description>’)
The <queuename> is the new AS/400 print queue name, <service> is the TROY print server service name, <driver> is the OS/400 printer driver name (*HP4 is recommended if in doubt), and <ipaddress> is the IP address of the print server. Note that the IP address and description must be enclosed in single quotes.
Other systems use similar procedures to set up the TROY print server. These programs will generally ask for the following information:
Requested information: | You should use: |
remote printer or remote | TROY print server binary or text service name |
remote host computer name | Any name (must match name in printcap file, if any), or in some |
| cases, you may enter the TROY print server IP address here |
remote host IP address | TROY print server IP address |
Tech support specialists for these companies can usually answer configuration questions if you provide them with the equivalent UNIX configuration information (tell them that the TROY print server looks like a remote UNIX host computer running the lpd line printer daemon).
4.If you have not created a spool directory for the TROY print server on your UNIX host computer, you will need to do so now (the printer setup utilities in HP/UX, AIX, Solaris 2.xx, and other systems will automatically create the spool directory). The lpd spool directory is usually located in the /usr/spool directory (check with your system manager to see if the location is different for your system). To create a new spool directory, use the mkdir command. For example, to create a spool directory for the queue laser1, you would enter:
mkdir /usr/spool/lpd/laser1
PocketPro 100S Administrator’s Guide |