TROY Group 100S manual Create

Section 4 Novell NetWare Network Configuration

Configuring the Print Server for Remote Printer Mode Using NWAdmin (cont.)

4.Load the PSERVER NLM (NetWare Loadable Module) on your NetWare file server, and make sure that you select the Print Server that you created earlier. Verify that your PServer NLM is “running”.

5.In NWAdmin, select the desired Container Object

(Organizational Unit) that will contain the new

printer, and then click on Object Create.

6.When you get the New Object menu, select Printer (Non-NDPS), and then click on OK.

PocketPro 100S Administrator’s Guide -- Document #40165-110 Rev. A 4-51