Kawasaki STX-15F service manual Crossmember Installation

13-12 HULL/ENGINE HOOD

Fittings

•Pull out the holder [A].

•Unscrew the mounting bolts [D] and remove the cable bracket [C] with the cable [B].

•To remove the right side cover, pull the holder [A] off the cable bracket.

•Unscrew the mounting nuts [A] and washers [B] and the left [C] and right [D] covers.

•Unscrew the crossmember bolts [E] and bracket [F], and remove the crossmember [G].

Crossmember Installation

•Apply a non-permanent locking agent to the crossmem- ber bolts and torque them.

Torque - Crossmember Bolts: 7.8 N·m (0.80 kgf·m, 69 in·lb)

•Be sure that the dampers [A] are in position.

•Apply a non-permanent locking agent to the cable bracket mounting bolts and tighten them securely.