Kawasaki STX-15F service manual Steering

STEERING 12-13

Steering

•Remove the cotter pin [A] and steering shaft locknut [B].

•Take out the holder [C].

•Unscrew the steering holder mounting bolts [A], nuts, and washers, and lift up the steering holder [B].

•Take out the air intake duct mounting bolts [A] and remove the air intake duct [B] from the steering holder [C].

•Disconnect the switch case lead connector and pull the leads [A] out of the hull.

•Disconnect the pipe at the fuel vent hose upper end and pull down the fuel vent hose [B].

•Disconnect the throttle cable upper end at the throttle case and pull down the throttle cable [C].

•Remove the lock plate [A].

•Take out the steering shaft nut [B] and pull down the steer- ing shaft [C].

•Remove the steering holder.