Kawasaki STX-15F service manual Pump Assembly, JT1500-A1,A2 ∼

PUMP AND IMPELLER 11-11

Pump and Impeller

•Remove the bearing by tapping evenly around the bearing inner race from the front end of the pump case [A].

Special Tool - Bearing Driver Set: 57001-1129 [B]

JT1500-A2 ∼ ;

•Press [A] the bussing [B] and the ball bearing [C]. They come out of the pump case.

•Remove the circlip.

•Remove the grease seals.

Special Tool - Oil Seal & Bearing Remover: 57001-1058 [A]

JT1500-A1,A2 ∼ ;

•Insert a metal rod [A] into the pump cap [B] from the rear end, remove the bearing by tapping evenly around the bearing inner race from the rear end of the pump cap.

Pump Assembly

•Before installing the cap bearing, blow any dirt or foreign particles out of the pump cap [A] with compressed air.

•Install new bearing into the cap as far as it will go.

Special Tool - Bearing Driver Set: 57001-1129 [B]