![](/images/new-backgrounds/1106542/1065429x1.webp)
Contents
Removing and Replacing the Fan Module
Replacing the Battery
Connecting the Management Interfaces and Performing Initial System
Configuration
Connecting the Local Console
Setting Up the Local Console
Initial System Configuration
Setup Command Parameters
Step 1: Configuring Initial Settings
Step 2: Configuring the Hostname
Step 3: Setting the Passwords
Step 4: Configuring Time Settings
Step 5: Configuring the DNS Settings
Step 6: Configuring the RDR Formatter Destination
Step 7: Configuring Access Control Lists (ACLs)
Step 8: Configuring SNMP
Step 9: Configuring the
Step 10: Completing and Saving the Configuration
Connecting the Management Interface
Cabling the Management Port
Verifying Management Interface Connectivity
Cabling the Line Ports and Completing the Installation 6-1
Connecting the line ports to the network
Cabling Diagrams
Configuring the GBE Interface Parameters
Connecting the GBE Line Interface Ports
Testing Connectivity: Examining Link LEDs and Counters
Installing a Cascaded System
CLI Commands
Loading and Activating a Service Control Application
Basic SCE 2000 Platform Operations 7-1
Starting the SCE 2000 Platform
Checking Conditions Prior to System Startup
Cisco SCE 2000 4xGBE Installation and Configuration Guide
| iii | |
|
|
|