Chapter 4 Installation and Maintenance
Installing the SCE 2000 Platform
Cisco SCE 2000 4xGBE Installation and Configuration Guide
OL-7824-04 4-9
This completes the steps for attaching the rack-mount supporting brackets to the rack.
You are now ready to mount the SCE 2000 to the rack.
When the appropriate mounting brackets are securely installed, the SCE 2000 can be installed
into the rack.
To mount the SCE 2000 to the rack after the brackets are installed, complete the following steps:
Step 1 Make sure that your path to the rack is unobstructed. If the rack is on wheels, ensure that the
brakes are engaged or that the rack is otherwise stabilized.
Step 2 Position the SCE 2000 so that the front end is closest to you, and lift it carefully to place it into
the rack. To prevent injury, avoid sudden twists or moves.
Step 3 Slide the SCE 2000 into the rack, pushing it back until the brackets (installed at the front of the
SCE 2000) meet the mounting strips or posts on both sides of the rack.
A rack with both front and back posts will have the crossrail supports installed. Slide the SCE
2000 onto these crossrails and push it all the way back.
Figure 4-8: Sliding the SCE 2000 into the Rack