![](/images/new-backgrounds/1106542/106542137x1.webp)
Chapter 5 Connecting the Management Interfaces and Performing Initial System Configuration
Initial System Configuration
Step 2: Configuring the Hostname
The hostname is used to identify the SCE 2000. It appears as part of the CLI prompt and is also returned as the value of the
The default hostname is SCE 2000.
To configure the hostname, complete the following steps:
Step 1 The current hostname is displayed.
•To accept the displayed value, press Enter.
•To change the value, type any desired character string and press Enter.
Enter hostname [SCE 2000]:
Step 3: Setting the Passwords
Configure the passwords as follows:
•Set the password for each authorization level (User, Admin, Root).
•Enable/disable password encryption. When password encryption is enabled, it encrypts the previously entered passwords.
Note Passwords are needed for all authorization levels in order to prevent unauthorized users from accessing the SCE 2000. Admin level should be used by the network administrator. Root level is for use by Cisco technician.
Note
Note
Passwords must meet the following criteria:
•Minimum length — 4 characters
•Maximum length — 100 characters
•Begin with an alpha character
•May contain only printable characters
Passwords are case sensitive.
The default password for all levels is “cisco”.
Cisco SCE 2000 4xGBE Installation and Configuration Guide
| ||
|
|
|