Cisco Systems SCE 2000 4xGBE manual Front Panel, Port Quantity Description Connect This Port To…

Chapter 2 Introduction to the SCE Platform

Front Panel

Front Panel

The SCE 2000 Front Panel consists of ports and LEDs as shown in the following figure and tables.

Figure 2-1: SCE 2000 Front Panel

Table 2-2	SCE 2000 Ports
Port	Quantity	Description	Connect This Port To…
Mng1/	2	10/100/1000 Ethernet RJ-45 ports for	A LAN using an FE cable
Mng2		management of the SCE 2000.	with an RJ-45 connector.
		CLI designation: interface Management	If both interfaces are used to
		0/1, 0/2.	provide a redundant
			management interface,
			connect both ports to the LAN
			via a switch.
Console	1	RS-232 RJ-45 port for use by technicians	A local terminal (console)
			using an RS-232 cable with
			an RJ-45 connector, as
			provided in the SCE 2000 kit.
AUX	1	RS-232 RJ-45 port used by technicians
GBE ports 1-4	4	GigabitEthernet SC ports for connecting	Refer to Connecting the Line
		to the line and/or cascading two devices	Ports (on page 6-1)for
		CLI designation: interface	cabling diagrams for various
			topologies
		GigabitEthernet 0/1 through 0/4

Cisco SCE 2000 4xGBE Installation and Configuration Guide

2-2 OL-7824-04