Cisco Systems SCE 2000 4xGBE Cabling the Line Ports and Completing the Installation

Cisco SCE 2000 4xGBE Installation and Configuration Guide
OL-7824-04 6-1
This chapter provides instructions for cabling the Gigabit Ethernet ports for both one and two
SCE 2000 topologies, and for configuring Gigabit Ethernet (GBE) interface parameters. In a
topology utilizing two SCE 2000s (cascade), this includes the cascade ports as well as the line
ports.
Note When installing a cascaded system, it is extremely important to follow the sequence of procedures
outlined in the section Installing a Cascaded System (on page 6-10).
Note When installing an External Optical Bypass module, the SCE 2000 line ports are connected to the
module. See Cabling the External Optical Bypass Module (on page A-4) for complete instructions.
This chapter contains the following sections:
• Connecting the line ports to the network 6-1
• Installing a Cascaded System 6-10
• Loading and Activating a Service Control Application 6-14
Connecting the line ports to the network
The procedures for cabling the line ports, configuring the interface parameters, and testing
connectivity of the links are explained in the following sections:
• Cabling Diagrams (on page 6-2)
• Configuring the GBE Interface Parameters (on page 6-6)
• Connecting the GBE Line Interface Ports (on page 6-7)
CHAPTER 6
Cabling the Line Ports and Completing the
Installation