Chapter 8 Troubleshooting
Troubleshooting Tools
Cisco SCE 2000 4xGBE Installation and Configuration Guide
OL-7824-04 8-5
• Viewing/clearing the User Log counters
Copying the User Log
You can view the log file by copying it to an external source or to disk. This command copies
both log files to the local SCE 2000 platform disk or any external host running a FTP server.
To copy the user log to an external source, use the following command:
From the SCE 2000# prompt, type logger get user-log file-name
ftp://username:password@ipaddress/path and press Enter.
The SCE 2000# prompt appears.
To copy the user log to an internal location, use the following command:
From the SCE 2000# prompt, type logger get user-log file-name target-
filename and press Enter.
The SCE 2000# prompt appears.
Viewing the User Log
Note This command is not recommended when the user log is large. Copy a large log to a file to view it (see
Copying the User Log (on page 8-5))
To view the user log:
From the SCE 2000# prompt, type more user-log and press Enter.
The user log appears, followed by the SCE 2000# prompt.