Preface
Organization
Cisco SCE 2000 4xGBE Installation and Configuration Guide
vi OL-7824-04
Organization

The major sections of this guide are as follows:

Chapter Title Description
1 Introduction This chapter provides a brief introduction to Cisco Service
Control.
2 Overview (on page 2-1) This chapter provides a hardware overview of the SCE
2000 platform.
3 Topology (on page 3-1) This chapter describes the possible deployment topologies
of the SCE 2000 and explains how various aspects of the
topology determine the configuration of the system.
4 Installation and
Maintenance (on page 4-
1)
This chapter explains how to install a SCE 2000 platform
in a rack or in a general tabletop installation and how to
install or replace the power supply units and fan modules.
5 Connecting the
Management Interfaces
and Performing Initial
System Configuration (on
page 5-1)
This chapter explains how to connect the SCE 2000
platform to a local console and perform the initial system
configuration via the setup wizard that runs automatically.
6 Cabling the Line Ports
and Completing the
Installation (on page 6-1)
This chapter provides instructions for cabling the Gigabit
Ethernet ports for both one and two SCE 2000 topologies,
and for configuring Gigabit Ethernet (GBE) interface
parameters. In a topology utilizing two SCE 2000s
(cascade), this includes the cascade ports as well as the
line ports.
7 Basic SCE 2000 Platform
Operations (on page 7-1) This chapter describes how to start up the SCE 2000
platform, reboot, and shutdown. It also describes how to
manage configurations.
8 Troubleshooting (on page
8-1) This chapter provides basic system startup troubleshooting
information.
A External Optical Byoass
(on page A-1) This appendix explains how to install the optional external
optical bypass module.