ASSEMBLY OF FURNACE
Your furnace requires the following items to be assembled or installed by the service person:
Feed Door Handle
Feed Door Latch
Ash Door Handle
Ash Door Latch
Blower and Blower Control
Electrical Connections
1.Remove all parts from inside the furnace and inspect for damage, including the firebrick as some breakage could occur during shipment.
2.Assemble the feed door handle as
shown in Figure 8. Install the latch as illustrated in Figure 9.
3.Assemble the ash door handle the same as shown in figure 8. Install the
latch as shown in Figure 10.
FIG. 8
NOTE: YOU MAY NEED TO
ADJUST THE LATCH
FORWARD OR BACKWARD
TO ASSURE PROPER FIT OF
THE DOOR.
FIG. 9 | FIG. 10 |
10 | •DRAWINGS FOR ILLUSTRATION PURPOSES ONLY• |
