![](/images/new-backgrounds/1183160/18316011x1.webp)
ASSEMBLY
Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed.
Note: The underside of the treadmill walking belt is coated with
Assembly requires the included allen wrenches | and your own phillips screwdriver | , | |
rubber mallet | , and adjustable wrench | . |
|
For help identifying the assembly hardware, see the drawings below. If a part is not in the parts bag, first check to see if it has been
Silver Ground | 1/2” Screw | Handrail Bolt | |
Screw |
| ||
|
| ||
3/4” Screw | Base Pad | Wheel Bolt | |
Screw | |||
|
| ||
Star Washer |
| Lower Handrail Bolt | |
Wheel Nut |
| ||
| |||
|
|
1.Make sure that the power cord is unplugged.
With the help of another person, carefully raise the Uprights (69) to the vertical position. Orient one of the Extension Legs (63) so that the Base Pad (61) is under- neath it, and insert the Extension Leg into the treadmill as shown. Note: It may be helpful to tip the Uprights as you insert the Extension Leg.
Insert the other Extension Leg (63) in the same way.
1 |
69 |
63 |
61 |
6