ProForm 831.295550 user manual

4.With the help of another person, carefully lower the Uprights (69) as shown. Note: It may be helpful to place one foot on one of the Extension Legs (63) as you tip the Uprights. Make sure that the Extension Legs remain in the Uprights.

Attach each Extension Leg (63) with two Base Pad Screws (39) and a Base Pad (57) as shown. Attach the lower Base Pad Screw, without the Base Pad, first.

Attach two Base Pads (57) to the base of the Uprights (69) with two Base Pad Screws (39).

Next, attach the two Wheels (66) with two Wheel Bolts (64), four Wheel Spacers (108), and two Wheel Nuts

(32)as shown. Do not overtighten the Wheel Nuts; the Wheels should turn freely.

With the help of another person, carefully raise the Uprights (69) to the vertical position.

5.Hold the Console Base (47) near the Left Handrail (71). Attach the two ground wires on the Console Base to the indicated small hole in the Left Handrail with the Silver Ground Screw (75).

6.Set the Console Base (47) on the Right Handrail (72) and the Left Handrail (71). Attach the Console Base with four 1/2” Screws (48). Start all four Screws before tighten- ing them; do not overtighten the Screws.

4			108
	69	66
		108	64
			39
66	108		57
108		32
	32		57
64	57
	39
		63	39
69	57
	39
63
5
	47
Small		Ground
		Wires
Hole
		75
71
6		47
72			71
48
			48

8