MAINTENANCE

V-BELTS

Check V-belts for deterioration and wear after every 50 hours of operation and replace if necessary. The belts are not adjustable. Replace belts if they begin to slip from wear. (See “TO REMOVE BELT COVER” in the Service and Adjustments section of this manual).

TheV-belts on your snow thrower are of special construction and should be replaced by original equipment manufacturer (OEM) belts available from your nearest dealer.Using other than OEM belts can cause personal injury or damage to the snow thrower.

AUGER GEAR CASE

•The gear case was fi lled with lubricant to the proper level at the factory. The only time the lubricant needs attention is if service has been performed on the gear case.

•If lubricant is required, use only Ronex ED #1 grease.

TRACTION DRIVE SYSTEM

DO NOT lubricate the drive components inside the snow thrower. The sprockets, hex shafts, drive disc and friction wheel require no lubrication. The bearings and bushings are lifetime lubricated and require no maintenance.

CAUTION: Any lubricating of the above compo- nents can cause contamination of the friction wheel and damage to the drive system of your snow thrower.

ENGINE

See engine manual.

LUBRICATION

Use only high quality detergent oil rated with API service classification SF-SJ. Select the oil's SAE viscosity grade according to your expected operating temperature.

NOTE: Although multi-viscosity oils (5W30, 10W30 etc.) improve starting in cold weather, these multi-viscosity oils will result in increased oil consumption when used above 32°F. Check your engine oil level more frequently to avoid possible engine damage from running low on oil.

Change the oil after every 50 hours of operation or at least once a year if the snow thrower is not used for 50 hours in one year.

Check the crankcase oil level before starting the engine and after each fi ve (5) hours of continuous use. Tighten oil fi ll cap / dipstick securely each time you check the oil level.

TO CHANGE ENGINE OIL

Determine temperature range anticipated before next oil change. All oil must meet API service classifi cation SF-SJ.

•Be sure snow thrower is on level surface.

•Oil will drain more freely when warm.

•Catch oil in a suitable container.

NOTE: The left side wheel may be removed from snow thrower for easier access to the oil drain plug and place- ment of a suitable container. The unit tilted, resting on the frame with the left wheel removed, will help drain any oil trapped inside the engine. (See “TO REMOVE WHEELS” in the Service and Adjustments section of this manual).

1.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with spark plug.

2.Clean area around drain plug.

3.Remove drain plug and drain oil in a suitable container.

4.Install drain plug and tighten securely.

5.Wipe off any spilled oil from snow thrower and engine.

6.Install left wheel (if removed for draining oil). Be sure to install klick pin into proper hole in wheel axle (See “TO REMOVE WHEELS” in the Service and Adjustments section of this manual).

7.Remove oil fi ll cap/dipstick. Be careful not to allow dirt to enter the engine.

8.Refill engine with oil through oil dipstick tube. Pour slowly. Do not overfill. For approximate capacity see “PRODUCT SPECIFICATIONS”section of this manual.

9.Use gauge on oil fi ll cap/dipstick for checking level. Be sure dipstick cap is tightened securely for accurate reading. Keep oil at “FULL” line on dipstick.

10.Wipe off any spilled oil.

MUFFLER

Inspect and replace corroded muffler as it could create a fire hazard and/or damage.

SPARK PLUG

Replace spark plug at the beginning of each season or after every 100 hours of operation, whichever occurs fi rst. Spark plug type and gap setting are shown in the “PRODUCT SPECIFICATIONS” section of this manual.

CLEANING

IMPORTANT: For best performance, keep snow thrower housing free of any dirt or trash. Clean the outside of your snow thrower after each use.

WARNING: Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with spark plug.

•Keep finished surfaces/wheels free of gasoline, oil, etc.

•We do not recommend using a garden hose to clean your snow thrower unless the electrical system, muffler and carburetor are covered to keep water out. Water in engine can result in shortened engine life.

15

Page 14 Page 16
Page 15
Image 15
Poulan P524ESA owner manual Engine, Cleaning
Page 14 Page 16

P524ESA specifications

The Poulan P524ESA is a reliable and efficient snow thrower designed to tackle winter's harshest conditions with ease. This powerful machine blends advanced technology with user-friendly features, making it an excellent choice for homeowners and professionals alike.

At the heart of the Poulan P524ESA is its robust 24-inch clearing width and 20-inch intake height, allowing it to clear large amounts of snow in a single pass. Powered by a 208cc engine, this snow thrower delivers impressive performance, capable of moving heavy, compacted snow effectively. The engine is designed for easy starting, ensuring that users can quickly get to work, even in the frigid winter temperatures.

One of the standout features of the P524ESA is its electric start capability, which allows users to start the machine with the push of a button. This convenience eliminates the frustration often associated with pull-start engines, especially in cold weather. The snow thrower also includes an easy-to-use recoil start as a backup option.

The P524ESA boasts a 2-speed forward and 1-speed reverse transmission, giving users the flexibility to adjust their speed based on snow conditions and terrain. This versatility ensures better control and maneuverability, especially in tight spaces around driveways, sidewalks, and patios.

Another key characteristic of the Poulan P524ESA is its durable construction. The strong steel housing and auger system are designed to withstand the rigors of heavy snowfall, while the heavy-duty rubber auger is efficient in breaking down and throwing snow. The adjustable chute deflector allows users to control the direction and distance the snow is thrown, making it easy to keep walkways and driveways clear.

In terms of comfort, the P524ESA is equipped with ergonomic handles and easily accessible controls, ensuring that operators can use it with minimal strain. The snow thrower also features integrated headlights for visibility during early morning or late evening snow clearing, adding to its practicality.

Overall, the Poulan P524ESA is a well-rounded snow thrower that combines power, efficiency, and user-friendly features. With its reliable engine, adjustable settings, and durable build, it's designed to make winter snow removal a breeze, allowing users to enjoy the season without the burden of heavy snowfall.
Top Page Image Contents