SERVICE AND ADJUSTMENTS

WARNING: To avoid serious injury, before performing any service or ad- justments:

1.Be sure throttle is in STOP position.

2.Remove safety ignition key.

3.Make sure the augers and all moving parts have completely stopped.

4.Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.

SNOW THROWER

TO ADJUST SNOW THROWER HEIGHT

See “TO ADJUST SKID PLATES” and “SCRAPER BAR” in the Operation section of this manual.

CHUTE DEFLECTOR

The chute defl ector, attached to the top of the discharge chute, is provided to direct discharging snow away from the operator. If the defl ector becomes damaged, it should be replaced.

WARNING: To avoid serious injury, never operate your snow thrower with the deflector removed or damaged.

To change direction and/or distance snow is discharged, see “TO CONTROL SNOW DISCHARGE” in the Op- eration section of this manual.

SHEAR BOLTS (See Fig. 19)

AUGER SHEAR BOLTS

Both right and left-hand augers are secured to the auger shaft with a shoulder/shear bolt and hex nut. Should a for- eign object or ice become lodged in the augers, the shear bolts are designed to break, preventing damage to any other components. If one or both augers do not turn when auger control lever is engaged, check to see if one or both of the bolts have sheared. To replace the shear bolts:

1.Disengage all controls and move throttle control to STOP position. Wait for all moving parts to stop.

2.Disconnect spark plug wire from spark plug and place it wear it cannot come in contact with spark plug.

3.Align hole in auger hub with hole in auger shaft and install a new 1/4-20 x 2" shoulder/shear bolt. Install 1/4-20 lock nut and tighten securely.

CAUTION: Do not substitute. Use only original equipment shear bolts as supplied with your snow thrower.

4.Connect spark plug wire to spark plug.

IMPELLER SHEAR BOLTS

 

The impeller is secured to the impeller shaft with two (2)

 

capscrew/shear bolts and hex nuts. Should a foreign object

 

or ice become lodged in the impeller, the capscrews are

 

designed to break, preventing damage to any other com-

 

ponents. If impeller does not turn when auger control lever

 

is engaged, check to see if the capscrews have sheared.

 

To replace the capscrew/shear bolts:

16

1.Disengage all controls and move throttle control to STOP position. Wait for all moving parts to stop.

2.Disconnect spark plug wire from spark plug and place it wear it cannot come in contact with spark plug.

3.Align holes in impeller hub with holes in impeller shaft and install two (2) new 1/4-20 x 1-5/8" capscrew/shear bolts. Install 1/4-20 locknuts and tighten securely.

CAUTION: Do not substitute. Use only original equipment capscrew/shear bolts as supplied with your snow thrower.

4.Connect spark plug wire to spark plug.

1/4-20

1/4-20 x 1-5/8

1/4-20 x 2

LOCKNUT

CAPSCREW /

SHOULDER /

 

SHEAR BOLT

SHEAR BOLT

 

IMPELLER HUB

 

 

IMPELLER

 

 

SHAFT

 

 

 

AUGER

 

 

HUB

1/4-20

AUGER

AUGER

LOCKNUT

HUB

SHAFT

FIG. 19

TO REMOVE BELT COVER (See Fig. 20)

1.Remove the two (2) screws securing belt cover to frame.

2.Remove belt cover.

Replace belt cover by installing cover and screws and tighten securely.

 

BELT

 

COVER

FRAME

SCREWS

FIG. 20

Page 16
Image 16
Poulan P524ESA owner manual Service and Adjustments, To Adjust Snow Thrower Height, Chute Deflector, Shear Bolts See Fig

P524ESA specifications

The Poulan P524ESA is a reliable and efficient snow thrower designed to tackle winter's harshest conditions with ease. This powerful machine blends advanced technology with user-friendly features, making it an excellent choice for homeowners and professionals alike.

At the heart of the Poulan P524ESA is its robust 24-inch clearing width and 20-inch intake height, allowing it to clear large amounts of snow in a single pass. Powered by a 208cc engine, this snow thrower delivers impressive performance, capable of moving heavy, compacted snow effectively. The engine is designed for easy starting, ensuring that users can quickly get to work, even in the frigid winter temperatures.

One of the standout features of the P524ESA is its electric start capability, which allows users to start the machine with the push of a button. This convenience eliminates the frustration often associated with pull-start engines, especially in cold weather. The snow thrower also includes an easy-to-use recoil start as a backup option.

The P524ESA boasts a 2-speed forward and 1-speed reverse transmission, giving users the flexibility to adjust their speed based on snow conditions and terrain. This versatility ensures better control and maneuverability, especially in tight spaces around driveways, sidewalks, and patios.

Another key characteristic of the Poulan P524ESA is its durable construction. The strong steel housing and auger system are designed to withstand the rigors of heavy snowfall, while the heavy-duty rubber auger is efficient in breaking down and throwing snow. The adjustable chute deflector allows users to control the direction and distance the snow is thrown, making it easy to keep walkways and driveways clear.

In terms of comfort, the P524ESA is equipped with ergonomic handles and easily accessible controls, ensuring that operators can use it with minimal strain. The snow thrower also features integrated headlights for visibility during early morning or late evening snow clearing, adding to its practicality.

Overall, the Poulan P524ESA is a well-rounded snow thrower that combines power, efficiency, and user-friendly features. With its reliable engine, adjustable settings, and durable build, it's designed to make winter snow removal a breeze, allowing users to enjoy the season without the burden of heavy snowfall.