OPERATION

TO ADJUST GAUGE WHEELS (See Fig. 6)

Gauge wheels are properly adjusted when they are slightly off the ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in proper position to help prevent scalping in most terrain conditions.

NOTE:Adjust gauge wheels with tractor on a fl at level surface.

•Adjust mower to desired cutting height (See “TO AD- JUST MOWER CUTTING HEIGHT” in the Operation section of this manual).

•With mower in desired height of cut position, gauge wheels should be assembled so they are slightly off the ground. Install gauge wheel in appropriate hole with shoulder bolt, 3/8 washer, and 3/8-16 locknut and tighten securely.

•Repeat for opposite side installing gauge wheel in same adjustment hole.

"ENGAGED" POSITION ATTACHMENT LIFT LEVER HIGH POSITION

LOW

POSITION

DEFLECTOR

SHIELD

ATTACHMENT CLUTCH LEVER "DISENGAGED" PO-

SITION

FIG. 7

GAUGE

WHEEL

MOUNTING

BRACKET

 

014

 

2

3/8-16

3

 

LOCKNUT

 

3/8 WASHER

SHOULDER

BOLT

 

 

GAUGE WHEEL

FIG. 6

TO OPERATE MOWER (See Fig. 7)

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine.You must remain fully and centrally positioned in the seat to prevent the engine from hesitating or cutting off when operating your equipment on rough, rolling terrain or hills.

•Select desired height of cut.

•Start mower blades by engaging attachment clutch control.

•TO STOP MOWER BLADES - disengage attachment clutch control.

CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped,or the deflector shield in place.

REVERSE OPERATION SYSTEM (ROS)

Your tractor is equipped with a Reverse Operation System (ROS). Any attempt by the operator to travel in the reverse direction with the attachment clutch engaged will shut off the engine unless ignition key is placed in the ROS "ON" position.

WARNING: Backing up with the attachment clutch en- gaged while mowing is strongly discouraged. Turning the ROS "ON", to allow reverse operation with the attachment clutch engaged, should only be done when the operator decides it is necessary to reposition the machine with the attachment engaged. Do not mow in reverse unless absolutely necessary.

USING THE REVERSE OPERATION SYSTEM -

•Move motion control lever to neutral (N) position.

•With engine running, turn ignition key counterclockwise to ROS "ON" position.

•Look down and behind before and while backing.

•Slowly move motion control lever to reverse (R) position to start movement.

•When use of the ROS is no longer needed, turn the ignition key clockwise to engine "ON" position.

ROS "ON" POSITION

ENGINE "ON" POSITION

 

(NORMAL OPERATING)

02828

TO OPERATE ON HILLS

WARNING: Do not drive up or down hills with slopes greater than 15° and do not drive across any slope.

•Choose the slowest speed before starting up or down hills.

12• Avoid stopping or changing speed on hills.

Page 11 Page 13
Page 12
Image 12
Poulan PB19H42LTS manual To Adjust Gauge Wheels See Fig, To Operate Mower See Fig, Reverse Operation System ROS
Page 11 Page 13

PB19H42LTS specifications

The Poulan PB19H42LTS is a robust and reliable lawn tractor designed to meet the needs of both homeowners and property managers. This lawn tractor combines power, efficiency, and user-friendly features, making yard maintenance simpler and more enjoyable.

One of the standout features of the PB19H42LTS is its powerful 19 horsepower Briggs & Stratton engine. This engine provides ample power for cutting through thick grass and handling various terrains. With a reliable overhead valve design, it ensures better fuel efficiency and lower emissions, making it an eco-friendly option for lawn care.

The tractor boasts a 42-inch cutting deck, which is ideal for maneuvering through smaller yards while still covering a broad area. This size strikes a balance between providing efficient cutting capabilities and maintaining ease of operation. The cutting deck is equipped with three adjustable blades, allowing users to choose their desired cutting height with ease. The height of the deck can be adjusted from 1 to 4 inches, providing versatility for different lawn conditions.

The PB19H42LTS features a rugged and durable chassis, made to withstand the rigors of frequent use. Its sturdy frame supports stability and a smooth ride, even on uneven terrain. The rear-wheel drive enhances traction, giving users confidence when mowing on inclines or wet grass.

User comfort is prioritized with an ergonomic seating arrangement. The adjustable high-back seat is designed for long-term comfort, reducing fatigue during extended mowing sessions. The steering wheel is easy to grip and maneuver, facilitating precision handling.

Another key technology integrated into the Poulan PB19H42LTS is its automatic transmission. This allows for seamless speed adjustments while driving and mowing, facilitating a smooth user experience. The foot-operated pedal system enables users to control speed without taking their hands off the wheel, making it easier to navigate around obstacles.

Safety is also a priority in the design of this lawn tractor. It includes features such as a safety key to prevent accidental starts and an automatic shut-off system that engages whenever the operator leaves the seat.

In summary, the Poulan PB19H42LTS is a feature-rich lawn tractor that brings power, efficiency, and comfort to your yard care routine. With its robust engine, adjustable cutting deck, user-friendly design, and safety features, the PB19H42LTS stands out as a reliable choice for anyone looking to maintain their lawn effectively. Whether you're tackling a small yard or a larger property, this lawn tractor provides the tools you need to achieve a beautifully manicured lawn with ease.
Top Page Image Contents