To Replace Headlight Bulb, Interlocks and Relays

SERVICE AND ADJUSTMENTS

KEPS

NUT

HEX

BOLT

POSITIVE (RED)	NEGATIVE
CABLE	(BLACK) CABLE

FIG. 28

TO REPLACE HEADLIGHT BULB

•Raise hood.

•Pull bulb holder out of the hole in the backside of the grill.

•Replace bulb in holder and push bulb holder securely back into the hole in the backside of the grill.

•Close hood.

INTERLOCKS AND RELAYS

Loose or damaged wiring may cause your tractor to run poorly, stop running, or prevent it from starting.

•Check wiring. See electrical wiring diagram in the Repair Parts section.

TO REPLACE FUSE

Replace with 20 amp automotive-type plug-in fuse. The fuse holder is located behind the dash.

TO REMOVE HOOD AND GRILL ASSEMBLY (See Fig. 29)

•Raise hood.

•Unsnap headlight wire connector.

•Stand in front of tractor. Grasp hood at sides, tilt toward engine and lift off of tractor.

•To replace, reverse above procedure.

HOOD

HEADLIGHT

WIRE

CONNECTOR

FIG. 29

ENGINE

TO ADJUST THROTTLE CONTROL CABLE (See Fig. 30)

The throttle control has been preset at the factory and adjustment should not be necessary. Check adjustment as described below before loosening cable. If adjustment is necessary, proceed as follows:

•With engine not running, move throttle control lever from slow to choke position. Slowly move lever from choke to fast position.

•Check that holes “A” in governor control lever and hole in governor plate line-up. If holes “A” are not aligned, loosen clamp screw and move throttle cable until holes are aligned. Tighten clamp screw securely.

GOVERNOR		GOVERNOR
GOVERNOR		CONTROL
CONTROL LEVER		CONTROL
CONTROL LEVER		PLATE
		PLATE
HOLES “A”	CLAMP	THROTTLE
	SCREW	CABLE
		CABLE

FIG. 30

TO ADJUST CARBURETOR

The carburetor has been preset at the factory and adjust- ment should not be necessary. However, minor adjustment may be required to compensate for differences in fuel, temperature, altitude or load. If the carburetor does need adjustment, see engine manual.

High speed stop is factory adjusted. Do not adjust - damage may result.

IMPORTANT: NEVER TAMPER WITH THE ENGINE GOVERNOR, WHICH IS FACTORY SET FOR PROPER ENGINE SPEED. OVERSPEEDING THE ENGINE ABOVE THE FACTORY HIGH SPEED SETTING CAN BE DANGEROUS. IF YOU THINK THE ENGINE-GOVERNED HIGH SPEED NEEDS ADJUSTING, CONTACT YOUR N E A R E S T A U T H O R I Z E D S E R V I C E C E N T E R / DEPARTMENT, WHICH HAS PROPER EQUIPMENT AND E X P E R I E N C E T O M A K E A N Y N E C E S S A R Y ADJUSTMENTS.

PC14542B specifications

The Poulan PC14542B is a reliable and efficient lawn mower designed to tackle your yard maintenance needs with ease. This walk-behind mower features a powerful 14.5-horsepower engine that provides ample power to handle various grass types and terrains. Its 42-inch cutting deck allows for quick mowing over large areas, reducing the time spent on lawn care.

One of the key features of the PC14542B is its ease of use. The mower is equipped with a convenient electric start, ensuring that you can get started without the hassle of pulling a cord multiple times. The automatic choke system helps in achieving optimal engine performance, making it user-friendly, especially for those who may not be familiar with traditional mowers.

The cutting height is adjustable, allowing users to customize their mowing experience based on grass type and desired lawn height. With five position choices, you can effortlessly switch between cutting heights ranging from 1.5 to 4 inches. This versatility is essential for maintaining a healthy and aesthetically pleasing lawn throughout the seasons.

In terms of technology, the Poulan PC14542B features a durable steel deck, which improves the mower’s longevity while also ensuring a clean, even cut. The mower is designed to withstand the rigors of regular use, making it a great investment for homeowners. Additionally, the front washout port makes it easy to clean the cutting deck after use, preventing grass buildup and rust.

Another noteworthy characteristic is its maneuverability. The PC14542B is designed with a tight turning radius, allowing users to navigate easily around flower beds, trees, and other obstacles. The smooth-rolling wheels enhance stability and traction, ensuring that you can mow your lawn comfortably and efficiently.

The Poulan PC14542B also offers additional features, such as a rear bagger for collection, a mulch plug for returning nutrients to the soil, and side discharge capabilities for efficient grass dispersal. This flexibility allows homeowners to choose the most suitable mowing option for their lawn care routine.

In summary, the Poulan PC14542B is an excellent choice for those seeking a durable, efficient, and user-friendly lawn mower. Its powerful engine, versatile cutting heights, and easy maintenance options combine to make yard work less daunting and more enjoyable. Whether you’re maintaining a small yard or a larger property, this mower is equipped to meet various mowing needs effectively.

Poulan PC14542B owner manual To Replace Headlight Bulb, Interlocks and Relays, To Replace Fuse

Models: PC14542B