SERVICE AND ADJUSTMENTS

TO ADJUST BRAKE (See Fig. 22)

Your tractor is equipped with an adjustable brake system which is mounted on the right side of the transaxle.

If tractor requires more than six (6) feet stopping distance at high speed in highest gear on a level dry concrete or paved surface, then brake must be adjusted.

Depress clutch/brake pedal and engage parking brake.

Measure distance between brake operating arm and nut “A” on brake rod.

If distance is other than 1-1/2", loosen jam nut and turn nut “A” until distance becomes 1-1/2". Retighten jam nut against nut “A”.

Road test tractor for proper stopping distance as stated above. Readjust if necessary. If stopping distance is still greater than six (6) feet in highest gear, further maintenance is necessary. Contact your nearest au- thorized service center/department.

WITH PARKING BRAKE "ENGAGED"

1-1/2"

NUT "A"

JAM NUT

OPERATING

ARM

FIG. 22

TO REPLACE MOTION DRIVE BELT (See Fig. 23)

Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest.

Remove mower (See “TO REMOVE MOWER” in this section of this manual.)

Remove belt from stationary idler and clutching idler.

Pull belt slack toward rear of tractor. Remove belt upwards from transaxle pulley by deflecting belt keep- ers.

Pull belt toward front of tractor and remove downwards from around engine pulley.

Install new belt by reversing above procedure.

ENGINE

PULLEY

CLUTCHING

IDLER

STATIONARY

IDLER

TRANSAXLE

PULLEY

TRANSAXLE GEAR SHIFT LEVER NEUTRAL ADJUSTMENT (See Fig. 24)

The transaxle should be in neutral when the gear shift lever is in neutral (N) (lock gate) position. The adjustment is preset at the factory; however, if adjustment is needed, proceed as follows:

Make sure transaxle is in neutral (N).

NOTE: When the tractor rear wheels move freely, the transaxle is in neutral.

Loosen adjustment bolt in front of the right rear wheel.

Position the gear shift lever in the neutral (N) position.

Tighten adjustment bolt securely.

NOTE: If additional clearance is needed to get to adjustment bolt, move mower deck height to the lowest position.

GEARSHIFT LEVER

NEUTRAL

LOCK GATE

ADJUSTMENT

BOLT

FIG. 24

TO ADJUST STEERING WHEEL ALIGNMENT

If steering wheel crossbars are not horizontal (left to right) when wheels are positioned straight forward, remove steer- ing wheel and reassemble per instructions in the Assembly section of this manual.

FRONT WHEEL TOE-IN/CAMBER

The front wheel toe-in and camber are not adjustable on your tractor. If damage has occurred to affect the front wheel toe- in or camber, contact your nearest authorized service center/department.

FIG. 23

21

Page 21
Image 21
Poulan PC14542B To Adjust Brake See Fig, To Replace Motion Drive Belt See Fig, To Adjust Steering Wheel Alignment

PC14542B specifications

The Poulan PC14542B is a reliable and efficient lawn mower designed to tackle your yard maintenance needs with ease. This walk-behind mower features a powerful 14.5-horsepower engine that provides ample power to handle various grass types and terrains. Its 42-inch cutting deck allows for quick mowing over large areas, reducing the time spent on lawn care.

One of the key features of the PC14542B is its ease of use. The mower is equipped with a convenient electric start, ensuring that you can get started without the hassle of pulling a cord multiple times. The automatic choke system helps in achieving optimal engine performance, making it user-friendly, especially for those who may not be familiar with traditional mowers.

The cutting height is adjustable, allowing users to customize their mowing experience based on grass type and desired lawn height. With five position choices, you can effortlessly switch between cutting heights ranging from 1.5 to 4 inches. This versatility is essential for maintaining a healthy and aesthetically pleasing lawn throughout the seasons.

In terms of technology, the Poulan PC14542B features a durable steel deck, which improves the mower’s longevity while also ensuring a clean, even cut. The mower is designed to withstand the rigors of regular use, making it a great investment for homeowners. Additionally, the front washout port makes it easy to clean the cutting deck after use, preventing grass buildup and rust.

Another noteworthy characteristic is its maneuverability. The PC14542B is designed with a tight turning radius, allowing users to navigate easily around flower beds, trees, and other obstacles. The smooth-rolling wheels enhance stability and traction, ensuring that you can mow your lawn comfortably and efficiently.

The Poulan PC14542B also offers additional features, such as a rear bagger for collection, a mulch plug for returning nutrients to the soil, and side discharge capabilities for efficient grass dispersal. This flexibility allows homeowners to choose the most suitable mowing option for their lawn care routine.

In summary, the Poulan PC14542B is an excellent choice for those seeking a durable, efficient, and user-friendly lawn mower. Its powerful engine, versatile cutting heights, and easy maintenance options combine to make yard work less daunting and more enjoyable. Whether you’re maintaining a small yard or a larger property, this mower is equipped to meet various mowing needs effectively.