ASSEMBLY

INSTALL SEAT (See Fig. 3)

Adjust seat before tightening adjustment knob.

Remove adjustment knob and flat washer securing seat to cardboard packing and set aside for assembly of seat to tractor.

Pivot seat upward and remove from the cardboard pack- ing. Remove the cardboard packing and discard.

Place seat on seat pan so head of shoulder bolt is positioned over large slotted hole in pan.

Push down on seat to engage shoulder bolt in slot and pull seat towards rear of tractor.

Pivot seat and pan forward and assemble adjustment knob and flat washer loosely. Do not tighten.

Lower seat into operating position and sit on seat.

Slide seat until a comfortable position is reached which allows you to press clutch/brake pedal all the way down.

Get off seat without moving its adjusted position.

Raise seat and tighten adjustment knob securely.

SEAT

SEAT PAN

SHOULDER

BOLT

FLAT WASHER

 

ADJUSTMENT

 

KNOB

02464

FIG. 3

NOTE: You may now roll or drive your tractor off the skid. Follow the appropriate instruction below to remove the tractor from the skid.

TO ROLL TRACTOR OFF SKID (See Op- eration section for location and function of controls)

Press lift lever plunger and raise attachment lift lever to its highest position.

Release parking brake by depressing brake pedal.

Place freewheel control in "transmission disengaged position" (See “TO TRANSPORT” in the Operation section of this manual).

Roll tractor forward off skid.

TO DRIVE TRACTOR OFF SKID (See Op- eration section for location and function of controls)

WARNING: Before starting, read, understand and follow all instructions in the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people and objects.

Be sure all the above assembly steps have been com- pleted.

Check engine oil level and fill fuel tank with gasoline.

Place freewheel control in "transmission engaged" position (see "TO TRANSPORT" in Operation section of this manual).

Sit on seat in operating position, depress brake pedal and set the parking brake.

Place motion control lever in neutral (N) position.

Press lift lever plunger and raise attachment lift lever to its highest position.

Start the engine.After engine has started, move throttle control to idle position.

Release parking brake.

Slowly move the motion control lever forward and slowly drive tractor off skid.

Apply brake to stop tractor, set parking brake and place motion control lever in neutral position.

Turn ignition key to "STOP" position.

Continue with the instructions that follow.

ASSEMBLE GAUGE WHEELS TO MOWER DECK (See Fig. 4)

The gauge wheels are designed to keep the mower deck in properpositionwhenoperatingmower.Besuretheyareproperly adjusted to ensure optimum mower performance.

Slide gauge wheel bar down into bracket channel, Be sure that gauge wheel bar aligning holes are on top. Assemble gauge wheels as shown using shoulder bolts, 3/8 washers and 3/8-16 center locknuts and tighten securely.

For ease of mower to tractor assembly, raise gauge wheels to highest position and retain with clevis pins and spring retainers.

Adjust gauge wheels before operating mower. See “TO ADJUST GAUGE WHEELS” in the Operation section of this manual.

RETAINER SPRING

PIN

ADJUSTING

SHOULDER BAR

BOLT

GAUGE

WHEEL 3/8-16 CENTER LOCKNUT

3/8 WASHER

FIG. 4

7

Page 7
Image 7
Poulan PD25PH48STE owner manual Install Seat See Fig, Assemble Gauge Wheels to Mower Deck See Fig

PD25PH48STE specifications

The Poulan PD25PH48STE is a standout in the realm of lawn care, known for its power, efficiency, and user-friendly design. This riding mower is engineered for homeowners who seek a reliable and robust machine capable of handling larger lawns with ease and precision.

At the heart of the PD25PH48STE is a strong 25 horsepower Briggs & Stratton engine. This powerful engine ensures smooth operation and can tackle tough grass and uneven terrain without straining. Equipped with a hydrostatic transmission, this mower provides seamless speed control and a responsive driving experience. Operators can easily adjust their speed without hassle, which is particularly beneficial for navigating around obstacles in the yard.

One of the exceptional features of the Poulan PD25PH48STE is its 48-inch cutting deck. This wide cutting deck allows for increased productivity, as it enables users to cover more ground in less time. The deck is designed with three precision blades, promoting an even cut while reducing the likelihood of grass clumping. Furthermore, the cutting height can be easily adjusted, ranging from 1 to 4 inches, allowing users to customize their mowing experience according to their lawn conditions.

Another notable attribute of the PD25PH48STE is its comfortable and ergonomic seating. The high-back seat provides ample support, making long mowing sessions more enjoyable. Additionally, the design features a user-friendly dashboard, where operators can control the mower's various functions and monitor engine performance at a glance.

Safety is also a top priority with this model. The PD25PH48STE includes essential safety features such as an auto shut-off function that activates when the operator leaves the seat, protecting against accidental injuries. The robust frame is built to withstand the rigors of lawn care while ensuring stability and durability.

Moreover, the Poulan PD25PH48STE supports innovative technologies, including a maintenance-free battery and easy-access grease fittings for straightforward upkeep. This design focus guarantees the mower's longevity, allowing owners to invest in a product that will serve them well for years to come.

In summary, the Poulan PD25PH48STE is a reliable riding mower that combines power, versatility, and user-friendly features. Its robust engine, wide cutting deck, and safety-focused design make it an ideal choice for homeowners seeking to maintain their lawns efficiently. As a trusted name in outdoor equipment, Poulan continues to deliver quality products that enhance the mowing experience.