SERVICE AND ADJUSTMENTS

SIDE-TO-SIDE ADJUSTMENT (See Figs. 18 and 19)

Raise mower to its highest position.

At the midpoint of both sides of mower, measure height from bottom edge of mower to ground. Distance “A” on both sides of mower should be the same or within 1/4" of each other.

If adjustment is necessary, make adjustment on one side of mower only.

BOTTOM EDGE

 

BOTTOM EDGE

OF MOWER

 

OF MOWER

TO GROUND

 

TO GROUND

“A”

GROUND LINE

“A”

FIG. 18

To raise one side of mower, tighten lift link adjustment nut on that side.

To lower one side of mower, loosen lift link adjustment nut on that side.

NOTE: Three full turns of adjustment nut will change mower height about 1/8".

Recheck measurements after adjusting.

SUSPENSION ARM

LIFT LINK ADJUSTMENT NUT

FIG. 19

FRONT-TO-BACK ADJUSTMENT (See Figs. 20 and 21)

IMPORTANT: DECK MUST BE LEVEL SIDE-TO-SIDE. IF THE FOLLOWING FRONT-TO-BACK ADJUSTMENT IS NECESSARY, BE SURE TO ADJUST BOTH FRONT LINKS EQUALLY SO MOWER WILL STAY LEVEL SIDE-TO- SIDE.

To obtain the best cutting results, the mower housing should be adjusted so that the front is approximately 1/8" to 1/2" lower than the rear when the mower is in its highest position.

Check adjustment on right side of tractor. Measure distance “D” directly in front and behind the mandrel at bottom edge of mower housing as shown.

• Before making any necessary adjustments, check that both front links are equal in length.

• If links are not equal in length, adjust one link to same length as other link.

• To lower front of mower loosen nut “E” on both front links an equal number of turns.

• When distance “D” is 1/8" to 1/2" lower at front than rear, tighten nuts “F” against trunnion on both front links.

• To raise front of mower, loosen nut “F” from trunnion on both front links. Tighten nut “E” on both front links an equal number of turns.

• When distance “D” is 1/8" to 1/2" lower at front than rear,

tighten nut “F” against trunnion on both front links.

• Recheck side-to-side adjustment.

20

MANDREL

"D"

"D"

FIG. 20

BOTH FRONT LINKS MUST BE EQUAL IN LENGTH

NUT "F"

NUT "E"

TRUNNION

FRONT LINKS

FIG. 21

TO REPLACE MOWER BLADE DRIVE BELT (See Fig. 22)

The mower blade drive belt may be replaced without tools. Park the tractor on level surface. Engage parking brake.

BELT REMOVAL -

Remove mower from tractor (See “TO REMOVE MOWER” in this section of this manual).

Work belt off both mandrel pulleys and idler pulleys.

Pull belt away from mower.

BELT INSTALLATION -

Install new belt in reverse order of removal.

Make sure belt is in all pulley grooves and inside all belt guides.

Install mower in reverse order of removal instructions.

MANDREL PULLEY

IDLER PULLEYS

MANDREL

PULLEY

FIG. 22

TO ADJUST BRAKE (See Fig. 23)

Your tractor is equipped with an adjustable brake system which is mounted on the side of the transaxle.

If tractor requires more than six (6) feet stopping distance at high speed in highest gear on a level dry concrete or paved surface, then brake must be adjusted.

Page 20
Image 20
Poulan PO165H42STA To Replace Mower Blade Drive Belt See Fig, To Adjust Brake See Fig, Belt Removal, Belt Installation

PO165H42STA specifications

The Poulan PO165H42STA is a robust and versatile lawn tractor designed to meet the needs of both casual homeowners and more serious landscaping enthusiasts. With its powerful engine, user-friendly features, and efficiency, this riding mower offers a perfect solution for maintaining your lawn with ease and precision.

One of the standout features of the Poulan PO165H42STA is its reliable 16.5 HP Briggs & Stratton engine. This engine is specifically designed to deliver powerful performance, ensuring that the tractor can handle a variety of mowing tasks, from regular lawn mowing to tackling dense grass and tough terrains. The engine also operates quietly, which contributes to a more pleasant mowing experience.

The PO165H42STA is equipped with a 42-inch cutting deck, featuring a three-blade system that provides a clean and even cut across different types of grass. This wide cutting deck allows the tractor to cover more ground in less time, making it a practical choice for larger lawns. Furthermore, the height adjustment feature enables users to customize the cutting height to achieve the desired grass length, ensuring optimal results in various weather conditions.

The tractor's automatic transmission allows for smooth and easy operation, providing a single pedal to control both speed and direction. This ease of use makes the Poulan PO165H42STA accessible for users of all experience levels. Its zero-turn radius capability means that users can navigate around obstacles such as trees and flower beds with incredible agility, enhancing efficiency during mowing sessions.

In terms of comfort, the ergonomic seat is designed for extended periods of use, with good back support and cushioning. This feature is essential for those who may spend several hours tending to their lawns. The intuitive dashboard includes all the necessary controls, making it easy for users to concentrate on mowing without constantly looking down at controls.

Additionally, the Poulan PO165H42STA is equipped with a durable construction that ensures longevity and minimal maintenance requirements. The sturdy steel frame and reliable components are built to withstand the rigors of regular use, highlighting Poulan's commitment to quality.

Overall, the Poulan PO165H42STA combines power, efficiency, and comfort, making it an excellent choice for homeowners looking for a dependable lawn tractor to maintain their outdoor spaces. Its thoughtful design and advanced technologies simplify lawn care, making it a valuable addition to any gardening toolkit.