OPERATION

TO ADJUST GAUGE WHEELS (See Fig. 6)

Gauge wheels are properly adjusted when they are slightly off the ground when mower is at the desired cutting height in operating position. Gauge wheels then keep the deck in proper position to help prevent scalping in most terrain conditions.

NOTE:Adjust gauge wheels with tractor on a flat level surface.

Adjust mower to desired cutting height (See “TO AD- JUST MOWER CUTTING HEIGHT” in the Operation section of this manual).

With mower in desired height of cut position, gauge wheels should be assembled so they are slightly off the ground. Install gauge wheel in appropriate hole with shoulder bolt, 17/32 washer, 3/8 washer, and 3/8-16 locknut and tighten securely.

Repeat for opposite side installing gauge wheel in same adjustment hole.

GAUGE

WHEEL

MOUNTING

BRACKET

3/8-16

LOCKNUT

3/8 WASHER

 

GAUGE WHEEL

SHOULDER

17/32 WASHER

BOLT

 

FIG. 6

TO OPERATE MOWER (See Fig. 7)

Your tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine.

Select desired height of cut.

Start mower blades by engaging attachment clutch control.

TO STOP MOWER BLADES - disengage attachment clutch control.

CAUTION: Do not operate the mower without either the entire grass catcher, on mowers so equipped, or the deflector shield in place.

"ENGAGED" POSITION

ATTACHMENT LIFT LEVER HIGH POSI- TION

LOW

POSITION

DEFLECTOR

SHIELD

ATTACHMENT CLUTCH LEVER "DISENGAGED" POSITION

TO OPERATE ON HILLS

CAUTION: Do not drive up or down hills with slopes greater than 15° and do not drive across any slope.

Choose the slowest speed before starting up or down hills.

Avoid stopping or changing speed on hills.

If slowing is necessary, move throttle control lever to slower position.

If stopping is absolutely necessary, push clutch/brake pedal quickly to brake position and engage parking brake.

Move motion control lever to neutral (N) position.

IMPORTANT: THE MOTION CONTROL LEVER DOES NOT RETURN TO NEUTRAL (N) POSITION WHEN THE CLUTCH/BRAKE PEDAL IS DEPRESSED.

To restart movement, slowly release parking brake and clutch/brake pedal.

Slowly move motion control lever to slowest setting.

Make all turns slowly.

TO TRANSPORT (See Figs. 4 and 8)

When pushing or towing your tractor, be sure to disengage transmission by placing freewheel control in freewheeling position. Free wheel control is located at the rear drawbar of tractor.

Raise attachment lift to highest position with attach- ment lift control.

Pull freewheel control out and down into the slot and release so it is held in the disengaged position.

Do not push or tow tractor at more than two (2) MPH.

To reengage transmission, reverse above procedure.

NOTE: To protect hood from damage when transporting your tractor on a truck or a trailer, be sure hood is closed and secured to tractor. Use an appropriate means of tying hood to tractor (rope, cord, etc.).

FIG. 8

TOWING CARTS AND OTHER ATTACHMENTS

Tow only the attachments that are recommended by and comply with specifications of the manufacturer of your tractor. Use common sense when towing. Too heavy of a load, while on a slope, is dangerous. Tires can lose traction with the ground and cause you to lose control of your tractor.

FIG. 7

12

Page 12
Image 12
Poulan PO165H42STA To Adjust Gauge Wheels See Fig, To Operate Mower See Fig, To Operate on Hills, To Transport See Figs

PO165H42STA specifications

The Poulan PO165H42STA is a robust and versatile lawn tractor designed to meet the needs of both casual homeowners and more serious landscaping enthusiasts. With its powerful engine, user-friendly features, and efficiency, this riding mower offers a perfect solution for maintaining your lawn with ease and precision.

One of the standout features of the Poulan PO165H42STA is its reliable 16.5 HP Briggs & Stratton engine. This engine is specifically designed to deliver powerful performance, ensuring that the tractor can handle a variety of mowing tasks, from regular lawn mowing to tackling dense grass and tough terrains. The engine also operates quietly, which contributes to a more pleasant mowing experience.

The PO165H42STA is equipped with a 42-inch cutting deck, featuring a three-blade system that provides a clean and even cut across different types of grass. This wide cutting deck allows the tractor to cover more ground in less time, making it a practical choice for larger lawns. Furthermore, the height adjustment feature enables users to customize the cutting height to achieve the desired grass length, ensuring optimal results in various weather conditions.

The tractor's automatic transmission allows for smooth and easy operation, providing a single pedal to control both speed and direction. This ease of use makes the Poulan PO165H42STA accessible for users of all experience levels. Its zero-turn radius capability means that users can navigate around obstacles such as trees and flower beds with incredible agility, enhancing efficiency during mowing sessions.

In terms of comfort, the ergonomic seat is designed for extended periods of use, with good back support and cushioning. This feature is essential for those who may spend several hours tending to their lawns. The intuitive dashboard includes all the necessary controls, making it easy for users to concentrate on mowing without constantly looking down at controls.

Additionally, the Poulan PO165H42STA is equipped with a durable construction that ensures longevity and minimal maintenance requirements. The sturdy steel frame and reliable components are built to withstand the rigors of regular use, highlighting Poulan's commitment to quality.

Overall, the Poulan PO165H42STA combines power, efficiency, and comfort, making it an excellent choice for homeowners looking for a dependable lawn tractor to maintain their outdoor spaces. Its thoughtful design and advanced technologies simplify lawn care, making it a valuable addition to any gardening toolkit.