SERVICE AND ADJUSTMENTS

•Depress clutch/brake pedal and engage parking brake.

•Measure distance between brake operating arm and nut “A” on brake rod.

•If distance is other than 1-9/16", loosen jam nut and turn nut “A” until distance becomes 1-9/16". Retighten jam nut against nut “A”.

•Road test tractor for proper stopping distance as stated above. Readjust if necessary. If stopping distance is still greater than six (6) feet in highest gear, further maintenance is necessary. Contact your nearest au- thorized service center/department.

WITH PARKING BRAKE

TRANSAXLE MOTION CONTROL LEVER NEUTRAL ADJUSTMENT (See Fig. 25)

The motion control lever has been preset at the factory and adjustment should not be necessary.

• Loosen adjustment bolt in front of the right rear wheel,

and lightly tighten.

• Start engine and move motion control lever until tractor

does not move forward or backward.

• Hold motion control lever in that position and turn engine

off.

• While holding motion control lever in place, loosen the

adjustment bolt.

“ENGAGED”

NUT “A”

1-9/16"

JAM NUT

OPERATING

ARM

•

Move motion control lever to the neutral (N) (lock gate)

 

position.

•

Tighten adjustment bolt securely.

NOTE: If additional clearance is needed to get to adjustment bolt, move mower deck height to the lowest position.

After above adjustment is made, if the tractor still creeps forward or backward while motion control lever is in neutral position, follow these steps:

•

Loosen the adjustment bolt.

•

Move the motion control lever 1/4 to 1/2 inch in the

 

direction it is trying to creep.

DO NOT TOUCH THIS NUT. IF FURTHER BRAKE ADJUSTMENT IS NECESSARY CONTACT YOUR NEAREST AUTHORIZED SERVICE CENTER/DEPARTMENT

FIG. 23

TO REPLACE MOTION DRIVE BELT (See Fig. 24)

Park the tractor on level surface. Engage parking brake. For assistance, there is a belt installation guide decal on bottom side of left footrest.

•Remove mower (See “TO REMOVE MOWER” in this section of this manual.)

•Remove belt from stationary idler and clutching idler.

•Pull belt slack toward rear of tractor. Carefully remove belt upwards from transmission input pulley and over cooling fan blades.

•Pull belt toward front of tractor and remove downward from around engine pulley.

•Install new belt by reversing above procedure.

ENGINE

PULLEY

CLUTCHING

IDLER

STATIONARY

IDLER

TRANSMISSION

INPUT PULLEY

FIG. 24

• Tighten adjustment bolt securely.

•

Start engine and test.

•

If tractor still creeps, repeat above steps until satisfied.

MOTION CONTROL

NEUTRAL

LEVER

LOCK GATE

 

 

ADJUSTMENT

 

BOLT

FIG. 25

TRANSMISSION REMOVAL/REPLACEMENT

Should your transmission require removal for service or replacement, it should be purged after reinstallation and before operating the tractor. See “PURGE TRANSMIS- SION” in the Operation section of this manual.

TO ADJUST STEERING WHEEL ALIGNMENT

If steering wheel crossbars are not horizontal (left to right) when wheels are positioned straight forward, remove steer- ing wheel and reassemble per instructions in the Assembly section of this manual.

FRONT WHEEL TOE-IN/CAMBER

The front wheel toe-in and camber are not adjustable on your tractor. If damage has occurred to affect the front wheel toe- in or camber, contact your nearest authorized service center/department.

21

Page 20 Page 22
Page 21
Image 21
Poulan PO165H42STA manual Transaxle Motion Control Lever Neutral Adjustment See Fig, To Replace Motion Drive Belt See Fig
Page 20 Page 22

PO165H42STA specifications

The Poulan PO165H42STA is a robust and versatile lawn tractor designed to meet the needs of both casual homeowners and more serious landscaping enthusiasts. With its powerful engine, user-friendly features, and efficiency, this riding mower offers a perfect solution for maintaining your lawn with ease and precision.

One of the standout features of the Poulan PO165H42STA is its reliable 16.5 HP Briggs & Stratton engine. This engine is specifically designed to deliver powerful performance, ensuring that the tractor can handle a variety of mowing tasks, from regular lawn mowing to tackling dense grass and tough terrains. The engine also operates quietly, which contributes to a more pleasant mowing experience.

The PO165H42STA is equipped with a 42-inch cutting deck, featuring a three-blade system that provides a clean and even cut across different types of grass. This wide cutting deck allows the tractor to cover more ground in less time, making it a practical choice for larger lawns. Furthermore, the height adjustment feature enables users to customize the cutting height to achieve the desired grass length, ensuring optimal results in various weather conditions.

The tractor's automatic transmission allows for smooth and easy operation, providing a single pedal to control both speed and direction. This ease of use makes the Poulan PO165H42STA accessible for users of all experience levels. Its zero-turn radius capability means that users can navigate around obstacles such as trees and flower beds with incredible agility, enhancing efficiency during mowing sessions.

In terms of comfort, the ergonomic seat is designed for extended periods of use, with good back support and cushioning. This feature is essential for those who may spend several hours tending to their lawns. The intuitive dashboard includes all the necessary controls, making it easy for users to concentrate on mowing without constantly looking down at controls.

Additionally, the Poulan PO165H42STA is equipped with a durable construction that ensures longevity and minimal maintenance requirements. The sturdy steel frame and reliable components are built to withstand the rigors of regular use, highlighting Poulan's commitment to quality.

Overall, the Poulan PO165H42STA combines power, efficiency, and comfort, making it an excellent choice for homeowners looking for a dependable lawn tractor to maintain their outdoor spaces. Its thoughtful design and advanced technologies simplify lawn care, making it a valuable addition to any gardening toolkit.
Top Page Image Contents