4
Allow blades to stop
before removing them
from the cut.
WARNING:
Blades can throw objects violently.
DYoucan be bl inded or injured.
DWear safety glasses and boots.
WARNING:
Hazard zone for thrown objects.
DBlades can throw objects violently.
DOthers can be blinded or injured.
DKeep people and animals 50 feet
(15 m) away.
Boots
Blades move
momentarily
after the
trigger is
released.
WARNING:
Blades move momentarily after the
trigger is released.
DThe blades can seriously cut you or
others.
DAllow blades to stop before
removing them from the cut.
Safety
Glasses
Thrown
Objects
Instruction
Manual Safety Decals
WARNING:
Read Instruction Manual.
DFollow all warnings and instructions.
DFailure to do so can result in
serious injury.

TRANSPORTING AND STORAGE

SDo not grasp or hold exposed blade.
SStop powerhead before leaving work area.
SAllow powerheadand gearbox to cool before
storing or transporting it in a vehicle.
SStore unit and fuel in area where fuelvapors
cannotreach sparks or open flames from wa-
ter heaters, electric motors or switches, fur-
naces, etc.
SStoreattachment so blade cannot accident al-
ly cause injury.
SStoreattachment indoors, out of reach of chil -
dren.
If situations occur which are not c overed in
this manual, use care and good judgment. If
you need assistance, call 1-800-554-6723.
SPECIAL NOTICE: Expos ure to vibra-
tions through prolonged use of gasolinepow-
ered hand tools could cause blood vessel or
nerve damage in the fingers, hands, and
joints of people prone to circulation disorders
or abnormal swellings. P rolonged use in cold
weatherhas been linked to blood vessel dam-
age in otherwise healthy peopl e. If symptoms
occur such as numbness, pain, loss of
strength, change in ski n color or texture, or
loss of feeling in thefingers, hands , or joints,
discontinue the use of this tool and seek med-
ical attention. An anti-vibration system does
not guarantee the avoidance of thes e prob-
lems. Users who operate power tools on a
continual and regular basis must monitor
closely their physical condition and the c ondi-
tion of this unit.
SAVE THESE INSTRUCTIONS
STANDARDS: Thisedger attachment is Listed byUnderwrit er’sLaborat ories, Inc.,in ac-
cordance with UL Standard 1602, “Gasoline --E ngine-- Powered, Rigid--Cutting--Member,
Edgers and Edger Trimmers,” only when used with the following m odels:
31cc Powerhead (with trimmer attachment) PP035............................